![]() |
||||||||
|
Features:
How to use the stain-remover:
a. Check that the mains adaptor
is connected properly. 1. Point the head towards the stain.
Operating in water:
1. Pour clean fresh water into a container to a depth of approximately 2cm. Place the stained material into the water, allowing the water to just cover stain. 2. Place the cleaning head on the stain and brush lightly on the stain (There is no need to brush hard.) The stains will be removed using ultrasonic vibration for about 2- 3 minutes at a time in total of 10-20 mins. In the case of very difficult stain, repeat the operation after 15 minutes for a completely satisfactory removal. 3. You may repeat this operation 2 or 3 times in the case of stubborn stains, chemical reaction on old clothes, paint stains etc. 4. Having removed the stains, put the garment in a washing machine for a normal wash 5. Cleaning frequency is bound to be different based on different fabrics, weave, degree of dirt and stains etc. 6. Some fabrics can whiten after being cleaned in an ultrasonic cleaner. We recommend you consult the manufacturer's label first before use.
|
Make your own cleaning solutions |
||||||
All
Rights Reserved | © Gannon Connexions Ltd. 5 Old Pinewood Way,
Papworth Everard, Cambridge CB3 8GT UK. Phone: +44 1480 832325 |
||||||||