How to remove stains with the Ultrasonic Stain Remover

A. Removing Blood Stains

To remove blood stain from fabrics or carpets, fill the Ultrasonic cleaner with cold water. Rinse out excess blood by running cold water on the fabric. To remove excess blood from carpets, flood the spot with cold water and soak off excess water with paper towels and operate the ultrasonic cleaner as normal. If any shadow remains apply a little liquid detergent, brush lightly with the brush attachment and wash as normal.

B. Removing Cherry Coke Stains From Carpets and Fabrics

To remove Cherry Coke stains, squeeze out any excess, spray clean water on the stain from the water tank and operate the Ultrasonic Cleaner. If treating an old or stubborn stain please soak in water with a small amount of liquid detergent for 5 minutes, squeeze out excess water, spray clean water and brush lightly with the cleaning head. The stains will disappear. For carpets dry out excess with paper towel.

C. Oil, Ink or Dirty Water Stains
Where one of the above stains has remained on the cloth for some time, we suggest that you first place the cloth in water for 4-5 minutes, adding a small amount of detergent to the water. The ultrasonic cleaner can then be used to remove the stain. Finally, soak the cloth in clean warm water and the stain will disappear.

D. Grass Stains
1. Brush off the excess grass from the cloth.
2. Spray the stain with fresh clean water from the product.
3. Pour some liquid detergent on the stained portion of the cloth and operate the product as normal.
4. Brush the treated area with the attached cleaning brush and repeat the above processes 2-3 times to get off all the stains.
5. Wash as normal.

Where the grass stains has remained on the cloth for some time, we suggest that you first place the cloth in water for 4-5 minutes, adding a small amount of detergent to the water. Then proceed to wash as above.

E. Curries and Tomato Ketchup

Rinse out excess stains with hot water and operate the ultrasonic cleaner. Apply a little liquid detergent and brush lightly with the brush attachment. Remove the attachment and operate the stain remover for 2 minutes and wash as normal.

F. Grease Stains

For grease stains, put some detergent in hot water, place the fabric in the water and soak for 5 minutes. Squeeze out excess water and operate the Ultrasonic Stain Remover for 2-3 minutes. Spray water on the fabric and attach the cleaning brush, and brush lightly on the fabric. Remove the cleaning brush, spray fresh water on the fabric and operate the stain remover, then wash as normal. For old grease stain repeat the above process 2 -3 times.

buy now

Other hints